If you do a lot of bolt fastening, you’re going to need the best cordless impact wrench. Sure there are many ways to drive and remove fasteners, but impact wrenches are the most effective and practical solution. Add the fact that prices have gone down and there’s every reason to get one.
Surely, these cordless impact wrenches are not for everyone as some of them carry a hefty price-tag. Remember that quality is a major component when evaluating power tools. Failure of the tool can often lead to dangerous situations and accidents. Quality and safety are very important when evaluating which tools to buy.
This is where this review guide steps in. I have a lot of experience working with all kinds of impact wrenches. I know how hard it must be to decide what to use, so I reviewed and chose the top 10 impact wrenches you can buy.
The DC825B is a powerful impact wrench designed for use in a wide range of applications. Among its many features are its ergonomic design, variable speed and powerful frameless motor. Dewalt makes a lot of great impact wrenches, and this is one of their best offerings yet.
This impact wrench has anti-slip grip for comfort and full control while you’re using the tool. One of the issues with ordinary impact wrenches is the lack of grip. This can be very frustrating so it’s good to see Dewalt has taken care of it here.
The brushes are built to last, and when the time comes for a replacement, the process is straightforward.
DC825B comes with 1,330 in-lbs. of torque, giving you the power to perform a diverse range of fastening tasks and projects.
The impact wrench is compact so you can use it in tight spots without experiencing fatigue.
DC825B is constructed from the highest quality material which ensures its longevity. The gear case and transmission are built from magnesium.
A frameless motor helps extend its life and dependability. The motor is one of the most important elements of an impact wrench. Dewalt knows that, which is why this component is well-designed.
RPMs are at 0 to 2400 / 0 to 2700 for superior application. The design gives you full control over its use so there won’t be any problems with regards to precision.
Comfortable to use
Can be used in tight spots
Brushes can be replaced easily
Light does not come on immediately after pulling the trigger.
Does not come with battery or charger (base model.)
The anti-slip grip is comfortable to hold, and it is well balanced and light. But don’t mistake this for lack of power because the mechanism is built for heavy duty use, and you can drive screws in headers and studs easily.
The DC825B works very well in fastening applications of different types and this is possible thanks to its 1330 inch lb. torque. It is precise and accurate, whether you’re driving or taking out wood or metal fasteners. With its variable speed control you’ll be able to get the optimum results regardless of application.
The DC825B is an outstanding impact wrench. It is easy to learn and very convenient to use even in the tightest of locations. Unlike other impact drivers, the DC825B is one of those impact drivers that actually gets the job done with no fuss. Whether you’re a beginner or long time DIY enthusiast, the DC825B should satisfy your requirements.
2. Ingersoll Rand W7150-K1 ½” Hi-Torque Impact One Battery Kit
The W7150-K1 is built with convenience and power in mind. Because it is cordless, you can bring the driver with you anywhere it’s required. While built for garage use, the W7150-K1 packs enough power for even professional level use.
Comes with 1100 ft-lb torque and 780 ft-lb. reverse torque, giving you the power to perform a wide array of applications. For all its power the W7150-K1 weighs just 6.8 lbs. so you won’t get tired carrying it.
This impact wrench comes with a blow molded case for your convenience. If you travel a lot and like to bring the wrench with you, this bag will come in handy.
The kit includes the driver, 20V li-ion 3.0 Ah batteries and the IQV20 charger. With other impact wrenches you’re going to have to buy the charger and batteries separately, so beginners will like this.
W7150-K1 sports a patent pending grip which offers soft touch comfort even with prolonged use. The grip also cuts down vibration and minimizes fatigue, allowing you to work for long stretches.
Made from lightweight and solid steel lined aluminum for the ultimate protection. With its superior casing, the internal parts are fully protected.
Has enough power for most DIY tasks.
Easy to operate.
Long battery life.
The torque is powerful.
Directional switch is small.
The impact driver doesn't feel as solid as other models.
As the customer reviews show, the W7150-K1 is powerful enough for even professional technicians. One of the most common complaints with most home impact wrenches is they don’t carry enough juice, but the W7150-K1 is an exception.
It’s built for heavy duty everyday use and you can use it on brake caliper bolts, lug bolts, crank pulleys, axle nuts, etc. The W7150-K1 is also effective for ball joints and similar applications. Reviewers have said the driver tends to get hot after being used, but this is rare and even if that happens, it cools down quickly.
The W7150-K1 is easy to use right out of the box. Right off you can use it to take out 1 ½ lug nuts with no problem at all. Another advantage going for this tool is it durability while other portable impact wrenches don’t last long, the W7150-K1 does, so you can use it for extended periods.
The Milwaukee M12 is a compact impact wrench that’s designed forlong term use at home or professional work. Among its top features are the brushless motor, overload protection and 2-mode drive control.
The M12 is powered by a brushless motor with 500 in-lb. maximum torque, more than enough for fastening and driving applications.
There are two drive control fastening modes for speed and variable power, essential for precision, accuracy and heavy duty work. During certain situations you’ll need to quickly switch between the modes or use one after the other. With this feature you can switch quickly without any hassle.
The Red Link Plus Intelligence system provides the M12 with sophisticated electronics. With this you’re assured of maximum performance as well as protection from overloading. The system communication built in ensures the battery, impact wrench and charger work together.
The M12 uses Red Lithium 2.0 batteries for superior performance, durableconstruction and design. With RedLithium you’re assured of more power per charge than other batteries.
Comes with two batteries.
5 year warranty.
Used by professional technicians.
Does not have a lot of customer reviews yet.
Doesn't have as much torque as competitors.
The M12 may not have as much torque as other impact wrenches, but it works great for most applications and DIY projects. Lightweight and easy to use in many tight spots, the M12 offers many benefits. The M12 motor is built for heavy duty use as well, capable of lasting 3 times longer than the average motor.
Runtime is twice as long compared to other impact wrenches, and its variable speed and power means your work can be as precise as you like it. There is also an onboard fuel gauge so you can keep an eye on the charge, reducing the downtime. Even if you use the M12 for long periods, there is no need to worry about over-discharge, overheating and overload.
Overall, the M12 is a very good impact wrench. Running at peak torque it’s more than capable of getting the job done. The electronics are well made and its battery life is one of the best I’ve seen. For a lot of DIY buffs the M12 packs just the right amount of power, and the safety features are definitely a plus.
4. Craftsman C3 Cordless 19.2 Volt Impact Wrench Driver Kit
The Craftsman C3 is a versatile impact wrench aimed at home DIY projects and auto maintenance. The C3 sports an ergonomic design for comfort, and it is equipped with several features for quick and efficient fastening.
The C3 kit comes with a 200 ft. – lb. torque for light and medium scale tasks. For home improvement and similar tasks, this level of torque is sufficient.
C3 offers a 3-speed variable RPM for precision work. Atlow the RPM goes from 0 to 1300 RPM, while at medium it is 0 to 2200 RPM. The maximum setting goes up to 3200 RPM.
A battery is bundled with the kit as well as the charger. This is one of the more popular features of the C3 as other impact wrenches don’t include the battery.
Ergonomical grip with nonslip feature. It’s also been designed to ensure comfort and balance even when used for prolonged periods.
There is also a built-in LED light, essential when you’re working in tight spots where it is difficult or impossible to set up a light.
The impact wench is light and portable, which makes it the ideal companion if you are always on the road.
LED Lights illuminate your work.
Lightweight and easy to carry around.
Fast and reliable performance.
Does not come with a case.
Cannot be used on very large trucks.
Lacking in torque power for heavy duty use.
The C3 is a good option for garage use. It isn’t the most powerful impact wrench, and advanced users may want to look for something else. But for beginners and casual users, the C3 is more than sufficient. Its peak torque goes up to 1605 in-lbs. for driving and fastening.
The C3 has 3 LED lights to cut down shadows, and it has an auto-load chuck so you can change the bit much faster. An over mold grip is included so it’s more comfortable to hold.
The lithium ion battery has a long lifespan, and it charges up to three times faster than Ni-Cad batteries. Because of its design, some are skeptical of its performance. But the C3 is actually pretty solid and removes rusty lug bolts without difficulty.
The HTH181B is built with power in mind but it doesn’t compromise when it comes to performance and reliability. Bosch has manufactured several high quality impact wrenches, and the HTH181B is one of the best.
The HTH181B provides 1900 RPMs and 2100 IMP, ensuring its efficiency and maximum performance.
Compatible with Fatpacks and Slimpacks, and you can keep an eye on the battery life.
The HTH181B spring loaded hammer and anvil provides high torque with minimal reaction.
With up to 500 lbs. of torque, the HTH181B is capable of removing and fastening different types of fasteners including lug nuts, concreteanchors and lag screws.
The lightweight design means you can use this in various locations. It is just 10 inches long and weighs 6.7 lbs. so you won’t feel fatigue when using it.
Easy to learn.
Does not come with bag.
Charger doesn't have an on/off button.
The HTH181B impact wench is outstanding when you consider its performance and capabilities. There are other more powerful impact wenches, but they’re large and unwieldy. Another advantage is its torque, which at 500 ft-lbs. is perfect for various tasks and projects.
The HTH181B impact wrench can be used to remove lug bolts off cars, jeeps and boats, even if they’re rusty and corroded. The time it takes to remove these vary, but in most cases that’s usually less than a minute. As far as battery life is concerned, it’s not that different from other impact wrenches.
Battery life depends on what type of task you’re going to do, but for vehicle and DIY projects the HTH181B should last. If you’re worried about running out of power, just bring battery reserves. At full power, the HTH181B fastens concrete anchors, lug nuts, etc. with no issues. Even a 210 ft. lb. wood chipper bolt won’t slow the HTH181B down.
At 6.7 lbs. the HTH181B is a lightweight compared to others, though it may be slightly uncomfortable to carry in tight areas. But overall the HTH181B impact wrench is easy to use, convenient and is very accurate.
The WR18DSDLP4 impact wrench is a compact but reliable impact wrench. It is aimed at beginners and those who perform light work, the WR18DSDLP4 is easy to operate, making it the ideal choice for new DIYers.
Its 500 torque ft. – lbs. and 1/2" square drive makes this suitable for fastening and other applications. With its squaredrive you’ll have an easier time replacing the sockets.
The WR18DSDLP4 has a built-in LED for use in dark areas. Some of the time you’ll be fastening or removing bolts in dimly lit environments, so the inclusion of the light is a nice touch.
It has a 2-step power control so you can choose between power saving and full power, depending on the task.
The WR18DSDLP4 impact wrench comes with a heavy duty 2-piece motor for an assortment of fastening work.
A soft grip handle, reduces fatigue and enhancing your control of the tool. The WR18DSDLP4 also has a narrow nose piece, making it easy to squeeze into tight spots and areas.
Changing sockets is easy.
Ergonomic design makes it comfortable to hold.
Ideal for use in tight spaces.
Not designed for power users.
Lacks name recognition of other high end brands.
The WR18DSDLP4 is not without its limitations, but it’s perfect for those new to DIY or use impact wrenches on occasion. It provides up to 188 flubs of torque, so it’s more than capable of most fastening jobs.
Ofcourse that’s easy for any product to say, but it really comes down to performance, and the WR18DSDLP4 does not disappoint. You can use it for small equipment maintenance, driving screws, sinking bolts and other machine related work.
I also have to point out the WR18DSDLP4 lithium ion battery has a long lifespan. It is more efficient than those which run onNi Cad batteries but is not as heavy. Add the brushes and power, and you got a complete impact driver.
The Milwaukee M18 looks a lot like the M12, but while there are similarities, the M18 also has features that separate it from the rest. Easy enough for novices to use, the M18 also has the specs for serous work.
The M18 provides up to 500 ft-lbs. of torque for optimum performance. Not only is the M18 powerful, but it has a runtime double that of other impact wrenches.
The M18 is built fromhigh quality materials and that extends to the motor. Even when used on a regular basis, the M18 motor has a lifespan that is three times longer than the typical impact wrench.
Brushless motor is built without any wearable parts. It also runs cool even when used for heavy duty work.
Like other Milwaukee impact wrenches, the M18 uses the Red Link Plus Intelligence for rapid switching of fastening modes. The Red Link works in conjunction with the Drive Control for precision. In the first mode you can go up to 300 ft-lbs. of optimum fastening, while in mode 2 you get up to 500 ft-lbs. of torque fastening.
Very quick learning curve.
Design allows you to use it in tight areas.
Quick release could have used a more solid design.
Batteries are not included.
The M18 is a reliable impact wrench, with a short learning curve at that. You’ll find this useful for bolts and screws on vehicles and different types of machines. You’ll also find the M18 a good choice for DIY as it’s very flexible.
The 7/16” Hex Quick-Connect makes it easy to insert socket adapters and augers, and its construction is one of the best in its class. When it comes to impact wrenches there are certain features you’ll look for like a powerful torque, long motor life and good runtime.
All of those are present in the M18, so it’s a good buy. Even though the batteries are not included, they’re easy to buy and you can get more out of it than others. Lastly, there are safety features built in to prevent overheating and overloading.
DEWALT DCF889HM2 20-volt MAX Lithium Ion 1/2-Inch High Torque Impact Wrench
The DCF889HM2 is another quality impact wrench from Dewalt. Highlighted by a 400 ft. lbs. torque, there are many features in the DCF889HM2 that raises it above the typical DIY impact wrench.
The hog ring anvil design makes it easy to change sockets. This is one of the more frustrating things in other impact wrenches, so this is something DIYers you will like.
Its batteries have been specially designed to last longer than those on other impact wrenches.
The DCF889HM2 also makes good use of its batteries, allowing you to use it for longer periods compared to other impact wrenches. Apart from the variable speed you also get an electric brake for even more precision control.
The built-in LED light provides illumination while you work. Under certainsituations you won’t be able to set up a light fixture, so this is an essential feature.
The DCF889HM2 case is built from magnesium, ensuring its durability. Magnesium is widely used in impact wrenches, which only goes to show how durable it is.
Variable speed gives you full control over its application.
Made of durable materials.
Can be used in tight and hard to reach areas.
Easy to use.
Slightly heavier than other impact wrenches.
One reviewer says it isn't as powerful as other 18v units.
The DCF889HM2 earns a spotin this list because of its capabilities and power. There are a lot of things to like here, and chief among them is its variable speed trigger. It is this feature that gives you maximum control over fastening aspects. With its 300 ft. lbs. torque you’ll also find the DCF889HM2 has the power you’re looking for.
The DCF889HM2 is not just solidly built, as it is also versatile. With thistool you can drive or remove wood fasteners, concrete or metal. You can do the same with bolts and nuts. The package includes a kit bag, MAX SR Premium Li-IonBatteries and a charger.
Ryobi P261 18V ONE+ 3-Speed 1/2 in. Cordless Impact Wrench
The 18V ONE provides up to 300 ft. lbs. torque, which gives you the power necessary to fasten and remove bolts and screws. Because the unit is cordless you don’t have to worry about wires getting entangled during operation.
The 18V ONE has athree speed selector so the user controls the fastening process with no difficulty.
A ½ square anvil allows you to quickly secure the connections for the socket.
The design is lightweight but powerful. With itsconstruction you’ll beable loosen and tighten nuts and bolts on different machines and tools.
The 18V ONE has an impact mechanism design, and this is what allows it to produce the 300 ft.- lb. torque and 3200 IPM (impacts per minute).
The 18V ONE is also comfortable to hold thanks to its GripZone. GripZone is used in the older models, but it has been significantly improved in this version.
Powerful battery can remove large lug bolts.
Ergonomic design makes it comfortable to use.
Offers precision control over fastening.
Easy to use in tight spots.
The LED light does an excellent job illuminating your work area.
Some customers have complained there's not enough power.
The 18V ONE is a major upgrade from the previous models. The previous version was good, but this is even better in all the major departments. It is just as easy to use as its predecessor but packs more features.
The combination of the torque and IPMs give the 18V ONE the power you need to fasten both light and heavy duty projects. With this power the impact wrench is the perfect solution for car maintenance and other stuff you do in the garage. The LED lights are nothing fancy but they do the work as far as illumination goes.
Taking everything into consideration, the 18v ONE is as good as they come. Its RPM selection is good (0 to 2900 no load speed) and it runs without a hitch. If there is a drawback it’d be that the battery and charger are not included. Be that as it may, if you’re looking for a tool to remove lug nuts, this is what you need.
This is the second C3 impact wrench we have here, and it’s a well-deserved spot. Does the C3 share many of the features that the other impact wrenches do? Yes, but it also has several features that distinguish it from the others and make it a practical tool to have.
The C3 has a powerful motor which generates up to 0-3,000 RPM for precision control.
The C3 has three LED lights built in. There will be times when you cannot avail of bulbs and lamps, so the three LED lights are going to help.
The C3 produces 300 ft. – lbs. of torque, and combined with the RPMs and IPMs and you have the power to fasten almost all fasteners used in garage and shop work.
The kit includes all the features you’ll need to use remove and drive bolts quickly.
Powerful torque allows you to perform basic and advanced fastening work.
The impact wrench is cordless so you can take it with you.
Can be used for full suspension work.
The battery lasts a long time.
Torque is not precision adjustable.
Complaints from customers of item not working out of box.
The C3 is as good as the other Craftsman impact wrenches, and in some cases it’s even better. It’s not the only cordless impact wrench, but the C3 is one of the lightest so you’re not going to feel weary while using it. The kit also comes with everything you need for your garage or auto work.
With 300 ft. – lbs. of torque, that’s good enough to loosen up even the tightest nuts. You can also use this to loosen up thick bolts in seconds. Another thing that should be pointed out is the kit includes a 4Ah XCP lithium-ion battery, so no need to make a separate purchase.
The battery itself runs longer than those used in other impact wrenches, and it’s easy to change as well. You can also use the C3 and its battery under extreme weather conditions, from 5 to 158 degrees. The LED lights work as well as they should and the textured grip ensures the tool won’t slip from your hands. All in all, the C3 is a well-designed impact wrench that delivers as promised.
So which of these is the best cordless impact wrench today? They’re all very good and provide all the benefits you’d expect. Some people prefer one over the other, but the truth is you can choose any of these ten and you won’t be disappointed with the results. Just give one of these a try and you’ll notice the difference the next time you have to drive or loosen bolts in or do other DIY work. Looking for a little more? Check out our Cordless Impact Buying Guide for insider tips to finding the best cordless wrench.